Showing posts with label stern. Show all posts
Showing posts with label stern. Show all posts

Thursday, April 18, 2013

The Impact of a Pinball Resurgence: The Tale of Metallica LE

The recent announcement of Stern's Metallica pinball machine line, specifically the Master of Puppets Limited Edition version, has presented some strong evidence supporting the pinball resurgence theory, but also in a way that isn't necessarily thrilling the long-time collector core community.  Let me try and sum this up in a nutshell, but some serious craziness has gone down in the last week, and even more in the last 24 hours.

On April 9, 2013, Stern released a teaser video for their latest machine, Metallica.  The initial announcements mentioned 400 Limited Edition (LE) machines in the plans, as well as a Premium (almost as good as the LE, but not numbered, and a bit less expensive), and a Pro version (a base model, fewer frills, and cheaper, the type more frequently put on location for public play).  Somewhere within the first few days, the LE run went from 400 to 500 machines. 



On April 11, 2013, a note from Gary Stern was posted on the official Stern Facebook page announcing that all the Limited Edition machines had been sold out (not what people usually mean when they talk about Metallica "selling out").  Keep in mind, there are two levels of "sold out" in pinball.  Sold out in this case meant that the number of LE units had been allocated out, or spoken for, to the various distributors.  Collectors didn't really panic at this because it doesn't typically mean a machine can no longer be had, even though the speed of Stern's sell-out was pretty fast compared to machines in the past.  Also of note; Stern's website crashed during this time.

The closest you may come to owning a Metallica Master of Puppets LE

LE playfield



Within 24 hours of that announcement, however, something unusual DID happen.  People started posting that distributors were also sold out of Metallica LE (the second tier of "sold out", a more true definition where a person can no longer purchase a machine, vs. just having to find the distributor who has remaining inventory).

It's unheard of for a machine, even an LE, to sell out that fast, and sell out it had.  There was a panic and scramble to try and get on the list for the LE.  People weren't used to having to make a $7000+ buying decision without even a gameplay video yet released, and many were left out in the cold. 

Normally the Premium model is an acceptable alternative to an LE (the playfield is virtually the same), but in this situation, people didn't like the art on the Premium translite:

Metallica Premium featuring actual band members

The draw of this pinball machine is partly the custom-drawn art package, and the Premium translite was the only one of the bunch that featured actual images of the band themselves.  People didn't like it, they wanted the fun, cartoon-style art of the LE and Pro translites.  This was one factor driving people to go after the LE.  Another factor that contributes is possible hoarding by speculators, both distributors, and buyers who went after multiple units with the suspicion that they would be able to flip them and make a profit.  Such value appreciation did occur in the case of the recent AC/DC "Back in Black" LE, and the speed with which the Metallica Master of Puppets LE run was snapped up is a strong indicator that the machine WILL appreciate.  We don't know how much of this has actually gone on, but the possibility doesn't help things.

SO these are pirhana-infested waters.  Then things got even worse.  As of this writing, it's not entirely clear what transpired on the afternoon of April 17th and into the next morning, but consensus and evidence suggests that Stern had to reallocate a large number of existing distributor units to either overseas distributors or potentially members of the Metallica fanclub, where the LEs had also been offered for sale and possibly over-sold.  Many distributors' allocations were cut in half, literally.  Whatever the reason, suddenly a large number of people who had thought themselves safely locked into an LE, even at a high price markup to ensure it, were being informed that they no longer had one.

Pitchforks and torches were taken up, and people were understandably furious.  Stern had drastically underestimated the demand for this product.  That doesn't mean more Limited Edition machines should be run, necessarily, but the problem was compounded by the fact that people didn't like the translite on the Premium.  That, paired with the speculators and the Metallica fanbase, and the gradual increase in pinball's popularity over the last couple years, created a perfect storm of demand.  People went pincrazy.


This is where Stern then did something right.  On April 18 (today), the day after the allocations cut and forum riots, Stern announced an alternative translite (actually an entire second art package) for Metallica Premium machines (shown below). 

Stern Pinball’s Metallica Game Success Leads To Second Premium Edition

World’s Leading Maker of Arcade Quality Pinball Collaborates With Legendary Rock Artist Dirty Donny Gillies to Create Metallica Game

MELROSE PARK, IL – April 18, 2013 – Stern Pinball, Inc., the world’s leading maker of real pinball games and the AAMA 2012 Manufacturer of the Year, announces the availability of a second Premium model Metallica pinball machine. The initial release of Metallica pinball captured the attention of gamers and fans alike. Stern sold out of both the US and International allocations of its 500 Limited Edition (“LE”) games within an hour of each respective customer announcement.

The second Premium edition machine features the vibrant artwork of Dirty Donny Gillies and complement’s Stern’s Metallica LE, “Road Case” Premium and Pro models.

The new Premium edition Metallica game boasts the same action-packed features as the Road Case Premium model and highlights the addition of Dirty Donny’s radical pop art creations. Dirty Donny is considered one of the most influential artists in the pop culture scenes of underground rock, punk and heavy metal. He is widely known for his creative work on concert posters, album covers and vinyl toys.

“Stern Pinball has pulled out all the stops for the Metallica machines,” said Dirty Donny. “Creating artwork for this special release game has been awesome. I can’t wait to see people’s reactions when they take a first look at it and get to play the game.”

For a glimpse of the game in action, Stern Pinball will be showcasing the Metallica pinball machine at Comic-Con International in San Diego this year with Nuclear Blast Records.

The Metallica game continues both the Stern Pinball and the Stern family tradition of producing quality pinball machines for young and old. The company traces its lineage to Philadelphia in the 1930s when Sam Stern entered the business of operating pinball games. Sam Stern subsequently became part owner and president of Williams Manufacturing, a pioneer in the pinball industry. Sam passed his lifelong enthusiasm for the game and the business of pinball to his son Gary Stern who founded Stern Pinball. Today pinball remains one of America’s favorite pastimes.

Pricing and Availability:

The Metallica pinball machine is available while supplies last through authorized Stern distributors and dealers.

Pro Version: $4,995
Premium Version (Road Case): $6,995
Premium Version (Donny): $6,995
Limited Edition Version: (Master of Puppets) $7,595 (SOLD OUT)

To learn more about The Metallica pinball games and Stern Pinball, visit www.sternpinball.com.


Metallica Premium, take 2!


We knew such a translite existed, as it is briefly visible in the teaser video. This was a good example of listening to your customers via social channels, and making a move to mitigate a supply issue when unexpected demand creates as big a problem as this overselling did.

It leaves the community wondering, though, if maybe it was more convenient to be a less popular hobby.  Oh, and did I mention, Stern had announced a $500 or so MSRP price increase for this machine?  Clearly that impacted demand about as effectively as a bucket of water on a forest fire.  So yes, pinball is growing, faster than anyone (even Stern) expected.  So fast that demand has far out-paced supply in this case, and resulted in some serious growing pains.

Monday, March 18, 2013

ACDC Pinball Drum Mod Installation Details

My husband recently purchased the AC/DC Drum Mod from Pinball Life, and Saturday night, we decided to install it.  Yeah, I know, we lead a life of wild party-filled weekends...

The instructions for installing the drum mod were decent, but I felt that adding our own experience to the mix might help other budding pinball modders.  One thing we felt was missing specifically was more detail on the solder points for the wires.

The first step was to feed the wires up through the playfield.  The hardest of the two for this step is definitely the lower playfield drum.  We had to use tweezers and teamwork to get the wire up through the playfield where it needed to go, because there were already a good number of wires going through that pathway.

Wires feeding up for lower playfield drum

Wires feeding up for  upper playfield drum
The trickiest part of this was knowing where to solder the wires, because the instruction sheet we had didn't have a picture of this.  The kit said to solder them to the flashers, but we had to do some trial and error in test mode to see when we had the correct points.  My husband was already familiar with this type of installation, though, from when he put the under-cabinet LEDs onto Tron Legacy.  What worked was having the green and yellow side connected to the red flasher, and the orange and yellow wires (the one with the black tape near the bottom) connected to the farthest flasher from the red one.  Hopefully this picture helps illustrate that.

Solder points for drum kit wiring

Installing the drums was not a big deal at all.  You have a choice of flasher color for this kit, and we chose yellow.  Adding the LED piece to the drums was a simple matter of peeling off the covering for the double-stick tape and just sticking it onto the back of the drums.

Lower playfield drum, side view

Upper playfield drum, side view

And here's a player-view of the completed installation.

Upper playfield drum, front view


Lower playfield drum, front view

The video below shows what they look like in action.  It's always hard to film pinball flashers adequately, and they look kind of blinding in this video.  I was afraid ours would be like that, but in reality they are very nice, and it's a relatively subtle effect.  I recommend this mod to anyone looking to improve what is a near-flawless machine to begin with. :)



Thursday, March 14, 2013

STERN code updates for X-Men and Transformers Pinball

At long last, STERN Pinball today released code updates for its Transformers and X-Men pinball machine models.

Both these machines really needed a code update, and owners had been waiting a long time, and feeling pretty neglected.  Time will tell if these updates satisfy them, there hasn't been a lot of reaction yet in the community.  I did have a chance to check out the new code on a Transformers LE just now.  I don't know the game well enough to know how dramatic an improvement we are talking here, and I liked the game before this.  I will say, I just had the best game of Transformers I've ever played, so it certainly didn't hurt. :)

You're damn right I'm a Decepticon!
These two code updates are so fresh, there aren't even any patch notes yet.  I will come back and post them here when they are live, just to provide an example of the kind of changes a code updates involves.

As most pinball owners know, you can get the latest STERN code updates here, on their website.

4/3/2013: below is an example, the update notes from the Transformers LE update.

V1.8 - March 14, 2013
=======================

- First pass of the redemption system.
    see http://www.sternpinball.com/downloads/Stern_Pinball_Redemption_System_Software_Manual.pdf
    for details.
- added an adjustment for launching balls after a locked ball.
- fixed a bug where Optimus/Megatron Super Jackpots were not initialized correctly when MB progression is turned off.
- The Optimus Prime Multiball progressive Super Jackpots are now scored based upon how many times Optimus Prime MB was started prior to scoring the Super JP.
  1 start = 100% of Super jackpot escrow.
  2 starts = 75% of Super Jackpot escrow.
  3+ starts = 50% of Super Jackpot escrow.
- The Megatron Multiball (A) progressive Super Jackpot is now scored based upon how many times Megatron MB was started prior to scoring the Super JP.
  1 start = 100% of Super jackpot escrow.
  2 starts = 75% of Super Jackpot escrow.
  3+ starts = 50% of Super Jackpot escrow.
- added Optimus Prime & Megatron Multiball minimum Super Jackpot scoring logic.
- added Autobot/Decepticon HSTD info to instant info
- added MB progress adjustments
- added Decepticon High Score tables.
- added Autobot High Score tables.
- added redemption ticket sounds
- added rule progression to the Optimus Prime Multiball rules.
- added rule progression to the Megatron Multiball rules.
- Changed text coordinates for redemption award display effect.
- Added game-specific display effect, lamp effect, and sound effects for redemption.

Friday, March 1, 2013

STERN Valentine's Day code updates

This past February 14th, STERN Pinball made a couple code updates available on their website.  These were for the newest pinball machine, Avengers, and TRON: Legacy, a well-received machine from 2011 that, rumor has it, is going to be "reprinted" (i.e., STERN is going to produce another run of TRON machines).

I had just done my morning coffee run that day when I happened to catch the post on Pinside mentioning the Avengers update.  It was a surprise, really, because Avengers was still pretty new, and had launched with fairly complete code already in place.  Avengers owners were already pretty happy.  But I quickly downloaded the file, and put it on a thumb drive.  I then printed out the documentation, which I left on the kitchen counter along with a "Happy Valentine's Day!" note and a few candy hearts sprinkled about.

I think this was my husband's favorite Valentine ever from me. :)  But the surprises weren't over, because a bit later on, I discovered that TRON had gotten an update too.  We have a TRON. 

So when I got home that night, we applied both updates.  The process for updating the code on modern pinball machines is actually quite easy, just a matter of plugging a thumb drive into the motherboard behind the backglass.  The directions .pdf STERN has available for this is clearly explained and easy to follow.

I haven't really spent much time on the Avengers since the update, but I will say that the changes to TRON were dramatic and instantly noticeable.  Many people are saying that TRON is now a whole different ballgame, literally, and I've seen more than one person say that they'd been planning to sell their TRON because they were tired of it, but had quickly changed their minds for now.  This update made TRON fun again for players who had maybe gotten bored with it.

And that's yet another example of an element of the pinball hobby that most people probably never thought about.  STERN still owes X-Men and Transformers owners some serious code updates, but the fact that something as solid and physical as a pinball machine can be changed like that after it's already sitting in your home... well that's pretty cool.

Wednesday, January 9, 2013

Hulk is smashing my confidence


A week or so ago, our Avengers pinball machine arrived from Stern.  We got one of the limited edition Hulk versions, partly because we totally called it that they were going to make one, and partly because my son loves Hulk.

The machine is gorgeous.  The lighting is some of the most beautiful I've seen.  The music is awesome, and the callouts (done by Marvel-approved impersonators, and not the actors from the film) always have me laughing.  I was a bit worried when I found out they weren't using film dialog or the actual actors, but they really did a good job with this.  I'm not one of those people that needs the audio clips on a pinball machine to always be referencing pinball.  Tron, for example, just tactically integrates actual movie dialog into the play experience, and I love that.  However, the Avengers callouts are great, and I'm now cool with that approach too.

You have to be a pretty accurate player to hit the shots in this game, you have to hit them pretty much dead-on, and the game is all about making those shots.  The ball will redily bounce into the outlanes and drain, too.  One of the goals is to assemble all the Avengers.  So far, I have assembled no more than two in any given game.  I almost always get the Hulk, and Captain America is not that hard to collect, but I've only gotten him a couple times, and Thor once, randomly. 

George, I love you, but it's pretty crazy when I'm falling back to AC/DC because it's nicer to me! :p  I think Avengers is a bit beyond my skill level, but I'm going to keep at it and see if I can improve.  I have to admit, the machine is brutal, but there's no doubt it'll make me a better player!  What doesn't kill you makes you stronger, after all, and when I do make the Hawkeye and Black Widow shots, it feels really freaking good.




Saturday, November 17, 2012

Interview with Gary Stern about the state of pinball

I wanted to share this update from 904 Pinball Zine from the Southern Pinball Festival.  It's a great interview with Gary Stern, who has been in the pinball business "for 65 years... because I'm 67." :)



So, about Avengers... official announcement at the end of November, pictures of all the different versions, spec list, possible gameplay video.

Alright then. 13 days to go.

Thursday, November 8, 2012

Avengers Pinball Confirmed

It's been called "the worst-kept secret in pinball" but the cat is well and truly out of the bag now on Stern's next pinball machine, and it is indeed going to be Avengers (advertisements for "Avengers coming soon from Stern" have shown up in a couple trade magazines this month).  It's assumed that the machine is being designed by George Gomez, and as he himself said about some of the whitewoods of his current project, "some of 'em are green..."  I'm all the more certain about my prior speculation of this meaning a Hulk Limited Edition version of Avengers pinball. 

And while Stern still has made no official announcement or released details beyond "Coming soon", some pinball retailers are already taking pre-orders.  The rumor mill has also hinted that this will be a very different design from the typical "fan layout" that Gomez is known for (he is also the designer of Lord of the Rings, one of the most highly regarded modern pinball machines, and definitely an example of the fan layout style).

There's a good chance that more information will come out in the IAAPA (International Association of Amusement Parks and Attractions) show next week (November 13 - 16) in Orlando.

Thursday, October 18, 2012

Some of 'em are green

Long have the rumors fluttered about regarding Avengers being the next Stern title, and in that time, I've pondered the likelihood of a Loki and Hulk pair of Limited Edition versions.  Along the lines of what they did for X-Men, with a Wolverine and Magneto LE pair, and a third regular version.

How could George Gomez NOT be referring to that here?



If my guess is correct, my son may be getting the most kickass Christmas present of his entire young life. And honestly, what else could it be? As for which would be Loki, between red and blue, I would assume red, leaving blue for the pro model machine.